MAIN PAGE
NEW PRODUCTS
New Registration(free)
SHOPPING CART
CHECKOUT
 
  Specials    |    Search    |    Contact Us    |     New Registration(free)     |     Customer Login    | japanese English Portugues tchinese  Paypal
  • sale

Top » Catalog » Clearance Sale » FrSky 8ch 2.4GHz Hitec A-FHSS Compatible Receiver [USHitec_V8FR]
Shopping Cart: now in your cart 0 items
Catalog
  STO SPECIAL
  Clearance Sale
  Helicopters
  Multi-copter
  Heli Parts
  Heli Accessories
  Flybarless System
  Airplanes
  Airplane Accessories
  Batteries/Charger
  Motors / ESC/BEC
  Nitro Accessories
  Radio Equipment
  FPV & Aerial Photography
  RC Car
  Miscellaneous
  For you and your kids
Quick Find
 
 Advanced Search
Top 5 selling for this category
Deluxe Motor Protection Cover for Phantom 1/2/3 <b>8Pcs Combo</b> [US70170007_cb]
Deluxe Motor Protection Cover for Phantom 1/2/3 8Pcs Combo [US70170007_cb]Shipped from USA Warehouse
US$45.32
9.7'' Monitor Hood (Cloth) for DJI Inspire 1 [US60024992]
9.7'' Monitor Hood (Cloth) for DJI Inspire 1 [US60024992]Shipped from USA Warehouse
US$34.00
Hitec DPC-10 Brushless Servo PC Programming Interface [USHS-44426]
Hitec DPC-10 Brushless Servo PC Programming Interface [USHS-44426]Shipped from USA Warehouse
US$19.99
Parrot MiniDrones Rolling Spider Smartphone Control Mini Quadcopter [US71092133]
Parrot MiniDrones Rolling Spider Smartphone Control Mini Quadcopter [US71092133]Shipped from USA Warehouse
US$159.95
2-leaf Foldable Prop CW Holder for DJI PHANTOM/Black (2pcs) [US20770000]
2-leaf Foldable Prop CW Holder for DJI PHANTOM/Black (2pcs) [US20770000]Shipped from USA Warehouse
US$16.84
US$4.37
Manufacturers
What's New?
Tarot 500 Parts battery Mounting Plate TL8010 for trex 500 [USTL8010]
Tarot 500 Parts battery Mounting Plate TL8010 for trex 500 [USTL8010]Shipped from USA Warehouse
US$4.69
US$3.90
Specials
Hard SF Propeller 10x4.7 (Push+Pull) [USAPC1047PP]
Hard SF Propeller 10x4.7 (Push+Pull) [USAPC1047PP]Shipped from USA Warehouse
US$2.69
US$2.29
Product Details
FrSky 8ch 2.4GHz Hitec A-FHSS Compatible Receiver [USHitec_V8FR]
[USHitec_V8FR]
US$33.68 US$24.99
PREVIOUS   38 OF 43   NEXT
Compatible to Hitec 2.4GHz A-FASS transmitter 8CH Recever

2.4Ghz A-FHSS Compatible 8CH Receiver

This receiver has been designed to be a compatible equivalent of the Hitec Minima line of receivers but with an increased specification. As this is compatible with the Minima line of receivers, please ensure that your Hitec 2.4GHz transmitter and/or module support the ability to connect to Minima receivers. For most units, it is likely they have this ability. However for older units, if not already done so, they may need their software updating to support it.

Linking the Receiver to your Transmitter

Please note that this is only a general procedure. If in doubt, please also refer to your transmitter or module instructions.

1. Put your transmitter into link mode. Usually this is done by pressing the button on the transmitter module and turning on the transmitter.

2. Ensure that your transmitter is in non-telemetry receiver link mode. This can be done by looking on the transmitter module's status light. If it is flashing Blue, it is in the correct mode. If it is flashing Red, you will need to change mode. To do this, press the button on the transmitter module for around 2 seconds. The status light should change between the two modes. If your module has old software, it may not be able to switch modes.

3. Now attach the supplied link jumper lead between the receiver's channel 5 and channel 1.

4. Power up the receiver.

5. While the receiver is searching for the transmitter module, the Green light on the receiver will flash slowly.

6 Once the receiver is successfully linked to the transmitter module, the Green light on the receiver will flash rapidly. This should only take a couple of seconds and is usually instant. If in doubt, try increasing the distance from the transmitter modules antenna and the receiver. It is recommended to have the receiver between 50cm and 2m away from the transmitter when linking.

Setting the Receivers Failsafe

By default, if the receiver loses contact with your transmitter it will stop driving the servos and the Red light will flash. If you lose radio contact you may wish to have the servo's driven to a predefined location. To set this, please follow the instructions below.

1. Ensure that your Transmitter is powered on and transmitting. The Receiver should be powered off.

2. Connect the link jumper lead between channel 5 and channel 2.

3. Power up the receiver.

4. Ensure that all the transmitter sticks are at the correct locations that you wish to have set up in the event of radio loss.

5. After 5 seconds the Red light should be lit with the Green light flashing rapidly.

6. Release the button and power cycle the receiver.

If you wish to revert to the default mode, simply relink the receiver as in the previous section.

PPM and RSSI Output Mode

Some advanced users may wish to connect the receiver to specialist devices that take PPM and/or RSSI information. Please ensure that the device supports this mode before operating, as incorrect connections or operation could cause damage and/or physical harm.

1. Put your transmitter into link mode.Usually this is done by pressing the button on the transmitter module and turning on the transmitter.

2. Ensure that your transmitter is in non-telemetry receiver link mode. This can be done by looking on the transmitter module's status light. If it is flashing Blue, it is in the correct mode.If it is flashing Red, you will need to change mode. To do this, press the button on the transmitter module for around 2 seconds. The status light should change between the two modes.

3. Connect a jumper between the top pins of servo connector 3 and 4.

4. Press and hold the button on the receiver and then power up the receiver.

5. While the receiver is searching for the transmitter module, the Green light on the receiver will flash slowly.

6. Once the receiver is successfully linked to the transmitter module, the Green and Red lights on the receiver will flash rapidly. This should only take a couple of seconds and is usually instant. If in doubt, try increasing the distance from the transmitter modules antenna and the receiver. It is recommended to have the receiver between 50cm and 2m away from the transmitter when binding.

Notes:
  • When the receiver is receiving a signal from the transmitter (i.e. the Red light is lit constantly) in PPM and RSSI output mode, the Green light will also be lit.
  • The PPM signal is outputted on servo connector 1
  • The RSSI signal is outputted on servo connector 2.
  • Do not connect conventional servos or ESCs to the PPM and RSSI servo connector outputs. Doing so, may burn out and destroy the servo.
  • Some devices may need a low-pass filter or buffer on the RSSI output. Please consult the devices' instructions or manufacturer for help or advice on this.
  • As the PPM signal is usually used to drive the primary flight controls, servo connector channels 5, 6, 7, 8 will shift to become channels 6, 7, 8 and 9 respectively to allow additional auxiliary devices to be connected.li>
  • To disable PPM and RSSI output mode, rebind the receiver as normal using bind jumper lead between channels 5 and 3.
  • In the event of a signal loss, by default the PPM output will stop. If a failsafe is needed, set the failsafe as in the previous section using the link jumper lead between channels 5 and 2.
Specification
  • Number of channels     8
  • Operating Voltage Range     3.5V~16V
  • Operating Current     30mA
  • Operating Range     Full Range (>1.5km)
  • Length     43.7
  • Width     24.2
  • Thickness     14
  • Weight     9
PLEASE NOTE: This unit is not designed, manufactured or supported by Hitec. This third party unit has been designed to be compatible with the Hitec product range of transmitters which may change specification at any time.

Manual
 
 
 
This product was added to our catalog on Wednesday 19 March, 2014.
US$33.68 US$24.99
MAIN PAGE    |    NEW PRODUCTS    |    New Registration(free)    |    SHOPPING CART    |    CHECKOUT    |    PRIVACY POLICY    |    View site in : CLASSIC - MOBILE
     Copyright © 2008-2016 Infinity Hobby
Please note that photographs may not accurately represent the number of items per package, the size, or color, or features of a product.
Product availability and price are subject to change without notice