|
Supports 3cells Li-Polymer batteries ONLY, 5 Channels work respectively
- Input Voltage: 13.5 - 24V DC
- Charge Current: 1.0 - 3.0A Adjustable in each channel
- Max Power: 190W / 15A
- Balance Precision: 10mV
1. CHARGE FUNCTIONS
1~5 packs of 3 cells Li-Polymer batteries can be chargerd at one time without same pack capability and cell voltage, there are 5 balance modules in the X3 Quint and provide 1∼3A for every pack solely.
e.g. 5 packs of 3 cells Lipo batteries(2000mAh - 2200mAh) will be finished charging in 1 hours with high efficiency.
The blue LEDs shining means the X3 Quint is charging batteries.
The red LEDs flash means the X3 Quint is balancing batteries
The blue LEDs dark means the charging is finished
2. BALANCE FUNCTIONS
Voltage balance can be done without DC input. Users just plug 3 cells Lipo battery (Max 5 packs) into the X3 Quint, then the balancing will run.
The red LEDs flash means the X3 Quint is balancing batteries.
The red LEDs dark means the balancing is finished
Warnings:
- Use a high quality power supply for input power source.
The input voltage must be 13.5~24 V, most of DC Power Supplier can be adjusted in +-1.5%range. Pls make sure the input voltage & power is rich for X3 Quint. if the input voltage is below 13.5V, the batteries will not be fully charged.
- X3 Quint can charge 3cells Li-Polymer batteries ONLY. Don't charge other types & cells of battery.
- Be sure that your Lipo battery pack balance connector & polarity match the type connected to the charger.
- Beware that the temperature of the charger shell & battery packs will increase during charge at high power.
- Do not exceed the battery manufacturer's suggested maximum charge rates.
- Never charge batteries unattended.
- Properly insulate and regularly inspect all connectors to eliminate the possibility of short circuit.
- Do not open the case of the charger under any circumstances. Doing so will void the warranty.
|
