1. Download the APP (Pocket FPV) to your Android phone first.
2. Power up the 5.8G video transmitter.
3. Connect the USV 5.8G FPV Receiver to Android phone through the USB OTG cable (the connector with USB icon to the receiver while the other end with lightning icon shall go to the smartphone). The APP (Pocket FPV) will be launched automatically as below :
Now click the “connector” icon near lower left of the screen, the screen “Select USB Web Camera” will be shown. Click OK to continue.
Once the noise screen is shown, the linkage between the receiver and Android phone is established. Click the central icon near bottom to switch the display mode between single and dual (for use with head mount such as Google Cardboard).
This is single display mode
Then press and hold the button of receiver for more than 3 seconds, the receiver will start to scan frequency and lock the signal from video transmitter (the one with most power). You can now start to use the smartphone for FPV maneuver.
Dual display mode : (for use with a goggles/head mount such as Google Cardboard)