We’re proudly publishing our foldable quad-copter. Let’s see the unboxing and introduction from RC Tech!
The Flexify quad copter’s main feature is the foldable appearance and the programmable module. With the bright orange color, it’s meant to be eye-catchy.
Carry size: 215x215x195 mm
Max wheelbase (diagonal motor to motor) 567 mm
Takeoff size w/folded prop: 609x609x195 mm
Takeoff size w/ unfolded prop: 842x842x195 mm
Takeoff Weight (without battery): 985g
Loading Weight (with FPV accessories, battery, camera, gimbal): 1000g
Maximum Takeoff Weight: 2000g
Propeller: 11x4.5’’ foldable prop
To decrease the size and ease the transportation, Flexify is equipped with foldable arms and foldable propellers; furthermore, the landing gear can be flipped to be a hand grip. The optional add-on module allows pilots to customize any unique preference and possibility.
The package include 2826/990 KV motors and 11x4.5’’ foldable prop, but Flexify is compatible with higher standard equipment- 40mm motor and 12.5” props.
The center is integrated by reinforced plastic; inside there is the powerful flight controller. Basic function (Ex. auto takeoff, auto landing, way point, RTL, altitude hold, low voltage landing…) are processed properly. There are multi-functional output ports for main voltage, +5V, video output/input, and controller port for CH7&8.
The standard radio transmitter is an 8CH 2.4 GHz transmitter; with simple interface, the remote distance is 1KM. If the Flexify is beyond the remote distance (lost signal), it would activate failsafe-auto RTL unless it gets back in the remote distance (receive the signal again). Pilot can also control Flexify through specific APP on smart phone, the remote distance is 500 meters.
Flexify is much more than a foldable drone. The optional add-on module allows pilots to customize any preference – 2D / 3D gimbal, spot light, offload hook, night cruising, rescue mission, long distance sketching… There are still unknown potential possibilities.
Flexify will debut on Taipei international photography & media equipment exhibition, 22nd-25th on October.
Here are the foldable power arms.
The center is integrated by reinforced plastic.
Here is for the optional add-on module.
There are multi-functional output ports for main voltage, +5V, video output/input, and controller port for CH7&8.
Include XT60 connectors for normal battery; the Velcro strap is to fasten the battery.
There is heat-sink design on the power arm.
There is LED to indicate the direction and drone position.
The package include 2826/990 KV motors, but Flexify is compatible with higher standard equipment- 40mm motor.
The 11x4.5’’ foldable prop can be assembled without tool; the prop holder is threaded.
There is a reinforce plate to support the foldable landing gear.
There is the slot for add-on module.
The demonstration is with GoPro camera.
There is the antenna mount on right landing gear.
The landing gear can be flipped to be a hand grip.
Pilot can also control Flexify through radio transmitter and smart phone.
Article Source: RC Tech